1. Improved system security. 2. Changed the default Encryption to WPA2/AES to avoid the weak security prompt on IOS 14. 3. Fixed the bug that some parent control entries will disappear on the Tether APP. Noted: For Archer C6 (US) 2.0. Archer C6 (US)_V2_191112. Download. 2 Accepted Solutions. The Archer C20 V4 do not have the range extender option, V5 does. You can setup the Archer C20 as the range extender via WDS bridging function. Below is the instruction to set it up. Note: Go to Wireless > Wireless Settings and click Enable WDS Bridging. May it help. Follow these steps to set up a VPN connection on your TP-Link Archer router: Log in to your TP-Link router’s web interface and enable the OpenVPN server. Fill out your connection preferences and download the OpenVPN configuration file. Optional but recommended: Enable Dynamic DNS (refer to our configuration guide for more details.) Set up a The default username and password both are admin (in lower case). Step 2. Go to Advanced > QoS > Settings. Select the Enable QoS checkbox. Note: Qos and NAT Boost cannot be enabled at the same time, you need to disable NAT Boost first. Please follow step a and b to disable NAT Boost. a. Click NAT Boost. b. Check to ensure EasyMesh is enabled. If not then enable it. 3. Click ADD SATELLITE DEVICES at the bottom of the screen, select TP-Link Router, then click NEXT. 4. Read and follow the instructions to prepare your satellite router, then click DONE. 5. Click ADD next to the displayed router. You will want to wait till you are prompted that the Watch this video to configure your TP link router as repeater. Follow the below mentioned procedure to easily set your TP Link Router as repeater –1.Place yo This video will show you how to connect your TP-Link Wi-Fi router and set up internet connection via the Tether app. Step 2: Click Basic on the top navigation bar, then select Wireles s on the left panel. Input your Wireless Network Name (SSID) and Password, then click Save (bottom left of the screen) to save your changes. Step 3: Click Advanced > Network > LAN. Change the LAN IPv4 to one on the main router’s subnet, then click SAVE. Note: After changing jZKw.